Mineral lime paint by EasyTadelakt
Technical data sheet:
General:
Lime-based mineral paint for indoor and outdoor use.
Mineral coating made of lime-based with specially aged lime and other exquisite organic ingredients, emission-free, extremely high ecological quality, with very good coverage, maximum grip and maximum resistance to weathering, without stains or powders, both for interior and exterior painting ,
This mineral lime color, regulates indoor climate, is antibacterial, anti-mold, antiseptic, breathable, absorbs CO2, prevents bad odors, promotes cleanliness in the air and is also suitable for use on damp walls.
Color: White Ibiza, Matt
Texture: Ser hard but soft in tact
Processing with:
Applicable with brush, roller or spray.
Dilute and clean:
Use only clear water to dilute the product and clean the tools.
Consumption:
About 0.15 L. / m2 per shift or 1.5L. up to 10m2 on smooth surfaces with low absorption. The actual final consumption always depends on the properties of the substrate. ,
Working temperature:
The ambient temperature for the application is between minimum 8º and maximum 35º and the humidity should not exceed 85%.
The optimum temperature is between 15 ° to 26 ° and the ideal humidity between 50% and 75%.
Suitable substrates for indoor and outdoor use:
Brushable on mineral substrates such as concrete, cement plaster or lime, limestone, natural stone, clay, plaster or plasterboard panels, over other mineral coating colors. The surface must have a minimum capacity for absorption.
General requirements of the substrate:
The floor surface must be clean and stable, free of dust and free of grease, oil or cracks.
Unsuitable substrates:
Not paintable on plastic surfaces, painted or glossy surfaces, wood, acrylic, glass and repellent colors, polished marble, metal, aluminum, smooth surfaces.
Underground treatment:
If the substrate is very absorbent, or if the background is full of contrasts, or if the background has different textures or materials, it is advisable to apply a first coat diluted with a maximum of 20% clear water and leave it to dry out (at least 8 hours)
Application:
After proper preparation of the subfloor, coat 1 to 3 coats with maximas 10% clear water if required.
The complete drying between each processed layer lasts between 8 to 24 hours under normal ambient conditions.
Important instructions:
The product is highly alkaline and corrosive to the skin. Wear the product with gloves, goggles and protective clothing. The product is highly corrosive to the mucous membranes, eyes and skin. In case of contact with eyes or mucous membranes, rinse immediately under running water and seek medical advice. Keep out of the reach of children. Do not swallow. When using a duster gun or sprayer, use a protective mask to prevent inhalation of the paint.
