Tadelakt Natural Flooring 25Kg.

Natural floor covering 25 kg. For 5 m2.

Continuous floor covering. Jointless pavement.

All colors are possible.

With the base coat " " también se puede aplicar este suelo natural directamente sobre azulejos.

Apply, smooth, wax and you're done.

No more cold floors, no more wet floors, no more energy losses, no more dull floors, and no more joints.

With this decorative natural floor covering, prepared with Marrakech lime, you'll benefit from comfort, energy savings, speed of application, a lower project budget, and the attractiveness of your home or business. You can walk barefoot on this natural floor covering year-round and enjoy a consistently warm floor during the winter without the need for underfloor heating.

This product is called Natural Flooring because we've sought greater hardness and durability. Its appearance resembles and combines perfectly with Tadelakt . However, its Tadelakt content is reinforced with other natural ingredients, as we believe Tadelakt as is is not optimal for floors with heavy traffic. For this reason, this product is not listed in the Tadelakt category, but rather in the "other coverings" category. Our priority is to offer the best quality, durability, and experience to our customers.

Its application is very quick and easy compared to other more common materials.

Depending on how it is applied, its finish can be matte, satin, or gloss. The appearance of its finishes is a continuous surface with a warm, natural, somewhat marbled stone appearance.

Its advantages over conventional pavements are numerous, as detailed below:

-Easy and quick to apply

-Breathable

-waterproof

-Insulator of cold, heat and humidity

-Regulator of the environmental climate

-Antiseptic

-Alkaline

-Antiallergic

-Bactericide

-100% natural

-Very long life

-Without joints

-Easy to clean

-Repairable

-Applicable on underfloor heating

It is also perfect for floors with moisture problems, stone floors, remediation of old and damp walls, and areas where mold and bacteria thrive.

First, apply a thin coat to a pre-moistened, dust-free porous floor. After 10 to 30 minutes, apply another thin coat, achieving the desired smoothness and pattern. After approximately 30 minutes, you can carefully step onto the floor and continue smoothing if desired. The next day, once it has dried thoroughly, apply a special, high-strength, breathable wax. After about 30 minutes, the wax will have dried. You can polish it if desired, and that's it. Your natural floor is ready to use. More detailed instructions are included in the product data sheet.

By adding pigments, any color can be achieved.